1000x shadows-free mirror-based Köler concentrator

Descripción (resumen): 

A new design for a photovoltaic concentrator, the most recent advance based on the Kohler concept, is presented. The system is mirror-based, and with geometry that guaranties a maximum sunlight collection area (without shadows, like those caused by secondary stages or receivers and heat-sinks in other mirror-based systems). Designed for a concentration of 1000x, this off axis system combines both good acceptance angle and good irradiance uniformity on the solar cell. The advanced performance features (concentration-acceptance products –CAP- about 0.73 and affordable peak and average irradiances) are achieved through the combination of four reflective folds combined with four refractive surfaces, all of them free-form, performing Köhler integration 2. In Köhler devices, the irradiance uniformity is not achieved through additional optical stages (TIR prisms), thus no complex/expensive elements to manufacture are required. The rim angle and geometry are such that the secondary stage and receivers are hidden below the primary mirrors, so maximum collection is assured. The entire system was designed to allow loose assembly/alignment tolerances (through high acceptance angle) and to be manufactured using already well-developed methods for mass production, with high potential for low cost. The optical surfaces for Köhler integration, although with a quite different optical behavior, have approximately the same dimensions and can be manufactured with the same techniques as the more traditional secondary optical elements used for concentration (typically plastic injection molding or glass molding). This paper will show the main design features, along with realistic performance simulations considering all spectral characteristics of the elements involved.


Tipo publicación: 
Conferencia por invitacion
Publicado en: 
Solar Energy + Technology: High and Low Concentrator Systems for Solar Electric Applications VII,Proceedings of SPIE Vol. 8468 pp. 84680C-84680C-7. San Diego (CA), USA
ISBN/ISSN: 
9780819491855
Ingeniería óptica
Fecha de Publicacion: 
Agosto 2012
Autores CeDInt: 
Otros Autores: 
Y. Sun, J. Chaves